Datasheet

UM11083 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved.
User Manual Rev. 1.0 — 9 February 2018 3 of 16
NXP Semiconductors
LPCXpresso804
User Manual
1. Introduction
The LPCXpresso family of boards provides a powerful and flexible development system
for NXP's Cortex-M MCUs. They can be used with a range of development tools, including
the MCUXpresso IDE. The LPCXpresso804 board is developed by NXP to enable
evaluation of and prototyping with the LPC804 MCU. Figure 1 shows the LPCXpresso804
main board. The board is also supplied with capacitive touch and PLU design prototyping
shield boards.
The LPCXpresso804 board includes the following features:
• Compatible with MCUXpresso IDE and other popular toolchains (incl. IAR and Keil)
• LPC804 Arm Cortex-M0+ MCU running at up to 15MHz
• On-board CMSIS-DAP (debug probe) with VCOM port, based on LPC11U35 MCU
• Debug connector to allow debug of target LPC804 MCU using an external probe
• LPC804 ISP and User/Wake buttons
• LPC804 Reset button
• 1Mb Winbond SPI flash
• NXP LM75BDP temperature sensor
• Programmable Logic Unit prototyping shield
• Capacitive Touch evaluation shield
• I
2
C Grove connector for easy connection of sensors, or to use the LPCXpresso804 as
an I/O expander peripheral
Fig 1. LPCXpresso804 Board