Datasheet

NXP Semiconductors
A71CH
How to start development with A71CH
AN12121
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2018. All rights reserved.
Application note
COMPANY PUBLIC
Rev. 1.0 — 22 February 2018
458510
8 of 17
standalone PCB and supports application development with NXP’s Bluetooth Low
Energy, Generic FSK, and IEEE Std. 802.15.4 protocol stacks including Thread.
Fig 6. FRDM-KW41Z Freedom development platform for Kinetis KW41Z/31Z/21Z MCUs
Table 4. Ordering details for i.MX6UltraLite Evaluation kit
Type number
12NC
Description
Ordering
FRDM-KW41Z
935326317598
FRDM-KW41Z Freedom
development platform for Kinetis
KW41Z/31Z/21Z MCUs
eCommerce
From a hardware perspective, the FRDM-KW41Z evaluation board can be used in
combination with OM3710/A71CHARD with the dedicated Arduino connectors. From a
software perspective, a MCUXpresso project example is available. This project example
contains the A71CH Host software package in it. The project is ready to be imported,
built, debugged and executed in Kinetis KW41Z MCU flash memory using MCUXpresso
IDE.
The A71CH Quick start guide for OM3710/A71CHARD for Kinetis KW41Z application
note [QUICK_START_KINETIS] provides full details on how get started with
OM3710A71CHARD and FRDM-KW41Z evaluation board.
Kinetis FRDM-K82F
The Freescale Freedom K82 hardware, FRDM-K82F, is a simple yet sophisticated
design featuring a Kinetis K series microcontroller built on the ARM® Cortex®-M4 core
which features a floating-point unit (FPU).
The FRDM-K82F can be used to evaluate the K80, K81, and K82 Kinetis K series
devices. The FRDMK82F board features the K82FN256VLL15 MCU, which boasts a
maximum operation frequency of 150 MHz, 256 KB of flash, a 256 KB RAM, a full-speed
USB controller with available crystal-less operation, and analog and digital peripherals.