Datasheet

UM11057 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2017. All rights reserved.
User Manual Rev. 1.0 — 9 June 2017 3 of 14
NXP Semiconductors
UM11057
User Manual
1. Introduction
The LPCXpresso-MAX family of boards provides a powerful and flexible development
system for NXP's low end Cortex-M0+ MCUs. They can be used with a range of
development tools, including the MCUXpresso IDE toolchain. The LPCXpresso845MAX
board is developed by NXP to enable evaluation of and prototyping with the LPC84x
family of MCUs. Figure 1 shows the LPCXpresso845MAX Board.
The LPCXpresso845MAX board includes the following features:
• Compatible with MCUXpresso IDE and other popular toolchains (incl. IAR and Keil).
• On-board CMSIS-DAP (debug probe) with VCOM port, based on LPC11U35 MCU.
• Debug connector to allow debug of target MCU using an external probe.
• Red, Green and Blue User LEDs.
• Target ISP and User/Wake buttons.
• Target Reset button.
• LPCXpresso expansion connector.
• DAC output via speaker driver and speaker.
• Arduino connectors compatible with the “Arduino UNO” platform.
• Pmod® compatible expansion header.
• Prototyping area.
Fig 1. LPCXpresso845MAXBoard