Datasheet

LPC15XX All information provided in this document is subject to legal disclaimers. © NXP B.V. 2014. All rights reserved.
Product data sheet Rev. 1 — 19 February 2014 58 of 99
NXP Semiconductors
LPC15xx
32-bit ARM Cortex-M3 microcontroller
[13] RTC running or not running.
[14] Characterized on samples. Not tested in production.
[15] Low-current mode PWR_LOW_CURRENT selected when running the set_power routine in the power profiles.
[16] Including voltage on outputs in tri-state mode.
[17] V
DD
supply voltage must be present.
[18] Tri-state outputs go into tri-state mode in Deep power-down mode.
[19] Allowed as long as the current limit does not exceed the maximum current allowed by the device.
[20] Pull-up and pull-down currents are measured across the weak internal pull-up/pull-down resistors. See Figure 17
.
[21] To V
SS
.
[22] The parameter values specified are simulated and absolute values.
[23] The input voltage of the RTC oscillator is limited as follows: V
i(rtcx)
, V
o(rtcx)
< max(VBAT, V
DD
).
[24] Including bonding pad capacitance.
Fig 17. Pin input/output current measurement
aaa-010819
+
-
pin PIO0_n
I
OH
I
pu
-
+
pin PIO0_n
I
OL
I
pd
V
DD
A
A