Datasheet

NXP Semiconductors
AN12395
OM-SE050ARD hardware overview
AN12395 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2019. All rights reserved.
Application note Rev. 1.1 — 27 June 2019
534311 16 / 24
Figure 12. Connection to non-Arduino board using the external I
2
C connector.
5.3 SE050 in I
2
C master mode
This section details the jumper configuration to enable the I
2
C master of the SE050. The
I2C master interface can be used to connect a sensor securely. The SE050 guarantees
the privacy and the authenticity of the data extracted by sensor. The data collected in
the application over the SE050 private sensor can be transferred to the cloud for further
treatment and analysis. The Figure 13 shows the SE050 solution block diagram for this
use case:
Figure 13. SE050 smart sensor use case block diagram
Figure 14 shows the jumper settings to enable the SE050 I
2
C master interface.