Datasheet

Table 57. D-PHY switching characteristics (continued)
Symbol Parameters Test
conditions
Min Typ Max Unit
- Maximum serial data rate On
DATAP/N
inputs. 80
OHM<= RL
<= 125
OHM
80 - 1500 Mbps
Δ
VCMRX(HF)
Common mode interference beyond 450
MHz
- - 100 mVpp
Δ
VCMRX(LF)
Common mode interference between 50
MHz and 450 MHz
-50 - 50 mVpp
CCM Common mode termination - - 60 pF
LP Line Receiver AC Specification
eSPIKE Input pulse rejection - - 300 Vps
TMIN Minimum pulse response 20 - - ns
VINT Pk-to-Pk interference voltage - - 200 mV
fINT Interference frequency 450 - - MHz
6.6.3.4 Low-Power Receiver timing
Figure 50. Input Glitch Rejection of Low-Power Receivers
Display modules
S32V234 Data Sheet, Rev. 8, 01/2019
NXP Semiconductors 67