User guide

2. Perform settings for using the USB TAP debugger.
Select FreeMASTER Code Warrior-CCS JTAG/OnCE in Freemaster Project –>
Options –> Comm, as shown in the following figure.
Figure 36 Options dialog box
3. Perform settings for using P&E Multilink FX debugger.
Select FreeMASTER BDM JTAG/OnCE in Project –> Options –> Comm, as shown in the
following figure.
Figure 37 Options dialog box
WCT1012 15W Single Coil TX V3.0 Reference Design System User’s Guide, Rev. 0, 09/2015
24 Freescale Semiconductor