User guide

4. Enter a target name, and then select MWCT1012 from the Target type drop-down list.
Figure 28 Bin file download (4)
5. Select Execute reset and Initialize target, set the initialization file path to the CodeWarrior
version 10 installation folder, and select MWCT1012.tcl for the MWCT1012 chip. The general
path is:
C:/Freescale/CW MCU v10.6/MCU/lib/wizard_data/DSC/DataBase/init_files.
Figure 29 Bin file download (5)
6. Set the memory configuration file path. For the MWCT1012 chip, it is MWCT1012.mem, located
under the CodeWarrior version 10 installation folder. Then, click Finish.
The general path is:
C:/Freescale/CW MCU v10.6/MCU/lib/wizard_data/DSC/DataBase/mem_files
WCT1012 15W Single Coil TX V3.0 Reference Design System User’s Guide, Rev. 0, 09/2015
Freescale Semiconductor 19