User guide

After the project is downloaded, the MCU stops at the startup code. Press F8 to let MCU go.
Step Go Pause Stop Watching window for Variables, Registers, Memory, and Breakpoints
Figure 24 Project Downloaded
6.2.3 Downloading an existing WCT1012 bin file (.elf) with CodeWarrior version 10
To flash an .elf file, perform these steps:
1. From the Flash Programmer drop-down list, select Flash File to Target.
Figure 25 Bin file download (1)
Source code
Disassembly
WCT1012 15W Single Coil TX V3.0 Reference Design System User’s Guide, Rev. 0, 09/2015
Freescale Semiconductor 17