User guide

Installing and Using the Netcomm Device Drivers
Using the Netcomm Device Drivers
38 MPC8568E Kit Configuration Guide
3. Open the Netcomm Device Drivers Ethernet use case project.
a. Select File > Open.
The Open dialog box appears.
b. Use this dialog box to navigate to the Netcomm Device Driver project file named
GethUseCases.mcp.
The project in this directory:
installDir \NetCommSW\build\bare_8568_cw_build\
user\bare\UseCases\UCC\GETH\GethUseCases.mcp
where
installDir is the directory in which you installed the Netcomm Device
Drivers package.
c. Click Open.
The CodeWarrior IDE loads the GEthernet use case project. A project window
(Figure 4.5
) appears, listing the files of the use case.
4. From the project window’s build target dropdown menu, select the SimpleUseCase
build target.
Figure 4.5 CodeWarrior™ Project Window — GETH Use Case Files Displayed
Click the down
arrow to select from
available use cases
Main use case
source files
Build target menu: