User guide

Installing CodeWarrior™ Development Studio
Installing the Linux® Development Tools
26 MPC8568E Kit Configuration Guide
Figure 3.4 Linux® Terminal Window
4. Enter this command:
rm -rf userHome /.CodeWarrior
(where
userHome is a placeholder for the full path of your home directory).
5. So the installer can run in graphical mode, enter this command:
xhost +
6. Use the su command to obtain superuser privileges.
NOTE You must have superuser privileges to install the CodeWarrior software.
7. Change directory to the directory on which you mounted the CD media.
8. Enter this command:
./setuplinux.bin
The CodeWarrior install wizard starts and displays its welcome page (Figure 3.5
).
NOTE If your kit includes CodeWarrior for Power Architecture Processors, v8.7
rather than v8.8, the wizard welcome page will have v8.7 rather than v8.8 in it.