User guide

Introduction
How this Manual is Organized
10 MPC8568E Kit Configuration Guide
How this Manual is Organized
Table 1.1 provides a brief description of each chapter in this document.
Table 1.1 Chapter Descriptions
Chapter Title Description of Contents
Preparing the
MPC8568E-MDS-PB Board
Explains how to connect the MPC8568E-MDS-PB
board to your development PC for:
• Bare board development
• Linux OS customization
• Linux application development
Installing CodeWarrior™
Development Studio
Explains how to install CodeWarrior Development
Studio for Power Architecture Processors,
Professional Edition.
Explains how to install CodeWarrior Development
Studio for Power Architecture Processors, Linux
Platform Edition.
Creating and Debugging an
MPC8568E-MDS-PB Project
Explains how to create a project for a bare board
application using the CodeWarrior bare board
toolchain, build this project, and download and debug
the resulting .elf format binary on the
MPC8568E-MDS-PB board.
Explains how to create a project for a Linux application
using the CodeWarrior embedded Linux toolchain,
build this project, and download and debug the
resulting application on the MPC8568E-MDS-PB
board.
Installing and Using the
Netcomm Device Drivers
Explains how to install and use the Netcomm Device
Drivers package.
Using the CodeWarrior™
QUICC Engine™ Utility
Explains how to install and use the CodeWarrior
QUICC Engine utility.
Using the
MPC8568E-MDS-PB BSP
Explains how to install and use the
MPC8568E-MDS-PB board support package and the
Linux Target Image Builder (LTIB).