Datasheet

Table 56. Example orderable part numbers
Part number
1
Package description Speed (MHz)
2
Operating temperature
3
Min (T
L
) Max (T
H
)
SPC5777CCK3MME3 MPC5777C 416 package
Lead-free (Pb-free)
264 –40 °C 125 °C
SPC5777CK3MME3 MPC5777C 416 package
Lead-free (Pb-free)
264 –40 °C 125 °C
SPC5777CCK3MMO3 MPC5777C 516 package
Lead-free (Pb-free)
264 –40 °C 125 °C
SPC5777CK3MMO3 MPC5777C 516 package
Lead-free (Pb-free)
264 –40 °C 125 °C
1. All packaged devices are PPC5777C, rather than MPC5777C or SPC5777C, until product qualifications are complete. The
unpackaged device prefix is PCC, rather than SCC, until product qualification is complete.
Not all configurations are available in the PPC parts.
2. For the operating mode frequency of various blocks on the device, see Table 3.
3. The lowest ambient operating temperature is referenced by T
L
; the highest ambient operating temperature is referenced by
T
H
.
6 Document revision history
The following table summarizes revisions to this document since the previous release.
Table 57. Revision history
Revision Date Description of changes
13 08/2018 In Table 3, added information for 300 MHZ frequency:
•
f
SYS
• f
PLATF
• f
ETPU
• f
PER
• f
fFM_PER
In Table 12 added Max value 240 MHz for f
PLL0PHI
and Table 13 added Max value 300 MHz for
f
PLL1PHI
.
In Table 34 updated the row from "100 MHz > fPLATF ≤ 133 MHz" to "100 MHz > fPLATF ≤ 150
MHz" under "Flash memory frequency" column.
In Figure 47 added 300 MHz frequency orderable part number.
Table continues on the next page...
Document revision history
MPC5777C Microcontroller Data Sheet Data Sheet, Rev. 13, 08/2018.
88 NXP Semiconductors