Datasheet

1 mm of wire extending from the junction. Place the thermocouple wire flat against the
package case to avoid measurement errors caused by the cooling effects of the
thermocouple wire.
When board temperature is perfectly defined below the device, it is possible to use the
thermal characterization parameter (Ψ
JPB
) to determine the junction temperature by
measuring the temperature at the bottom center of the package case (exposed pad) using
the following equation:
where:
T
T
= thermocouple temperature on bottom of the package (°C)
Ψ
JT
= thermal characterization parameter (°C/W)
P
D
= power dissipation in the package (W)
5 Ordering information
Figure 47 and Table 56 describe orderable part numbers for the MPC5777C.
M
Qualification status
Package identifier
PC 5777C X
K3
M ME 3/4 R
Core code
Device number
Optional features field
Fab/Revision
Temperature range
Package identifier
Operating frequency
Tape and reel status
M = –40 °C to 125 °C
Temperature range
ME = 416 MAPBGA Pb-Free
MO = 516 MAPBGA Pb-Free
Operating frequency
3 = 2 x 264 MHz
Tape and reel status
R = Tape and reel
(blank) = Trays
Qualification status
P = Pre-qualification
M = Fully spec. qualified, general market flow
S = Fully spec. qualified, automotive flow
Optional features field
(blank) = ISO-compliant CAN FD not available, trimmed for SMPS or external regulator, and includes SHE-compliant security firmware version 2.07
R = ISO-compliant CAN FD not available, trimmed for LDO regulator, and includes SHE-compliant security firmware version 2.08
C = ISO-compliant CAN FD available, trimmed for SMPS or external regulator, and includes SHE-compliant security firmware version 2.07
L = ISO-compliant CAN FD available, trimmed for LDO regulator, and includes SHE-compliant security firmware version 2.08
S = ISO-compliant CAN FD available, trimmed for SMPS or external regulator, and includes RSA-enhanced security firmware
T = ISO-compliant CAN FD available, trimmed for LDO regulator, and includes RSA-enhanced security firmware
Note: Not all options are available on all devices.
A = ISO-compliant CAN FD not available, trimmed for SMPS or external regulator, and includes SHE-compliant security firmware version 2.08
D = ISO-compliant CAN FD available, trimmed for SMPS or external regulator, and includes SHE-compliant security firmware version 2.08
4 = 2 x 300 MHz
Figure 47. MPC5777C Orderable part number description
Ordering information
MPC5777C Microcontroller Data Sheet Data Sheet, Rev. 13, 08/2018.
NXP Semiconductors 87