Datasheet

3.12.4 Data retention vs program/erase cycles
Graphically, Data Retention versus Program/Erase Cycles can be represented by the
following figure. The spec window represents qualified limits. The extrapolated dotted
line demonstrates technology capability, however is beyond the qualification limits.
3.12.5 Flash memory AC timing specifications
Table 33. Flash memory AC timing specifications
Symbol Characteristic Min Typical Max Units
t
psus
Time from setting the MCR-PSUS bit until MCR-DONE bit is set
to a 1.
— 9.4
plus four
system
clock
periods
11.5
plus four
system
clock
periods
μs
t
esus
Time from setting the MCR-ESUS bit until MCR-DONE bit is set
to a 1.
— 16
plus four
system
clock
periods
20.8
plus four
system
clock
periods
μs
t
res
Time from clearing the MCR-ESUS or PSUS bit with EHV = 1
until DONE goes low.
— — 100 ns
Table continues on the next page...
Electrical characteristics
MPC5777C Microcontroller Data Sheet Data Sheet, Rev. 13, 08/2018.
50 NXP Semiconductors