Datasheet

• Enhanced Modular Input/Output System (eMIOS) supporting 32 unified channels
with each channel capable of single action, double action, pulse width modulation
(PWM) and modulus counter operation
• Two Enhanced Queued Analog-to-Digital Converter (eQADC) modules with:
• Two separate analog converters per eQADC module
• Support for a total of 70 analog input pins, expandable to 182 inputs with off-
chip multiplexers
• Interface to twelve hardware Decimation Filters
• Enhanced "Tap" command to route any conversion to two separate Decimation
Filters
• Four independent 16-bit Sigma-Delta ADCs (SDADCs)
• 10-channel Reaction Module
• Ethernet (FEC)
• Two PSI5 modules
• Two SENT Receiver (SRX) modules supporting 12 channels
• Zipwire: SIPI and LFAST modules
• Five Deserial Serial Peripheral Interface (DSPI) modules
• Five Enhanced Serial Communication Interface (eSCI) modules
• Four Controller Area Network (FlexCAN) modules
• Two M_CAN modules that support FD
• Fault Collection and Control Unit (FCCU)
• Clock Monitor Units (CMUs)
• Tamper Detection Module (TDM)
• Cryptographic Services Engine (CSE)
• Complies with Secure Hardware Extension (SHE) Functional Specification
Version 1.1 security functions
• Includes software selectable enhancement to key usage flag for MAC
verification and increase in number of memory slots for security keys
• PASS module to support security features
• Nexus development interface (NDI) per IEEE-ISTO 5001-2003 standard, with some
support for 2010 standard
• Device and board test support per Joint Test Action Group (JTAG) IEEE 1149.1 and
1149.7
• On-chip voltage regulator controller (VRC) that derives the core logic supply voltage
from the high-voltage supply
• On-chip voltage regulator for flash memory
• Self Test capability
Introduction
MPC5777C Microcontroller Data Sheet Data Sheet, Rev. 13, 08/2018.
4 NXP Semiconductors