Datasheet

Revision history
i.MX RT1015 Crossover Processors Data Sheet for Consumer Products, Rev. 0.1, 03/2019
NXP Semiconductors 67
7 Revision history
Table 61 provides a revision history for this data sheet.
Table 61. i.MX RT1015 data sheet document revision history
Rev. Number Date Substantive Change(s)
Rev. 0.1 03/2019 • Added audio information in the Section 1, i.MX RT1015 introduction
• Updated FlexPWMs and Quadrature Encoder/Decoder in the Section 1.1, Features
• Updated the Table 1, Ordering information
• Updated keypad and GP timer numbers in the Figure 2, "i.MX RT1015 system block
diagram"
• Changed keypad to 4 x 4 in the Table 2, i.MX RT1015 modules list
• Removed the USB OTG2 from the Table 2, i.MX RT1015 modules list, Table 7, Absolute
maximum ratings, and Section 4.2.1.1, Power-up sequence
• Updated on-chip termination information for the JTAG_TCK and JTAG_MOD in the
Table 4, JTAG controller interface summary
• Updated descriptions in the Section 4.2.2.2.3, LDO_USB
• Changed the 528 MHz PLL to System PLL in the Table 16, System PLL’s electrical
parameters
• Changed the 480 MHz PLL to USB PLL in the Table 18, USB PLL’s electrical
parameters
Rev. 0 01/2019 • Initial version