Datasheet

Electrical characteristics
i.MX RT1015 Crossover Processors Data Sheet for Consumer Products, Rev. 0.1, 03/2019
NXP Semiconductors 31
4.3.3.1 Single voltage GPIO output buffer impedance
Table 24 shows the GPIO output buffer impedance (NVCC_XXXX 1.8 V).
Table 25 shows the GPIO output buffer impedance (NVCC_XXXX 3.3 V).
4.4 System modules
This section contains the timing and electrical parameters for the modules in the i.MX RT1015 processor.
4.4.1 Reset timings parameters
Figure 7 shows the reset timing and Table 26 lists the timing parameters.
Figure 7. Reset timing diagram
Table 24. GPIO output buffer average impedance (NVCC_XXXX 1.8 V)
Parameter Symbol Drive strength (DSE) Typ value Unit
Output Driver
Impedance
Rdrv
001
010
011
100
101
110
111
260
130
88
65
52
43
37

Table 25. GPIO Output buffer average impedance (NVCC_XXXX 3.3 V)
Parameter Symbol Drive strength (DSE) Typ value Unit
Output Driver
Impedance
Rdrv
001
010
011
100
101
110
111
157
78
53
39
32
26
23

Table 26. Reset timing parameters
ID Parameter Min Max Unit
CC1 Duration of POR_B to be qualified as valid. 1 —
RTC_XTALI cycle
POR_B
CC1
(Input)