Datasheet

i.MX RT1015 Crossover Processors Data Sheet for Consumer Products, Rev. 0.1, 03/2019
16 NXP Semiconductors
Electrical characteristics
4.1.3 Operating ranges
Table 9 provides the operating ranges of the i.MX RT1015 processors. For details on the chip's power
structure, see the “Power Management Unit (PMU)” chapter of the i.MX RT1015 Reference Manual
(IMXRT1015RM).
Table 9. Operating ranges
Parameter
Description
Symbol
Operating
Conditions
Min Typ Max
1
Unit Comment
Run Mode VDD_SOC_IN Overdrive 1.25 — 1.3 V —
VDD_SOC_IN M7 core at 396
MHz
1.15 — 1.3 V —
M7 core at 132
MHz
1.15 — 1.3
M7 core at 24
MHz
0.925 — 1.3
IDLE Mode VDD_SOC_IN M7 core
operation at 396
MHz or below
1.15 — 1.3 V —
SUSPEND (DSM)
Mode
VDD_SOC_IN — 0.925 — 1.3 V Refer to Table 13 Low power mode
current and power consumption
SNVS Mode VDD_SOC_IN — 0 1.3 V —
Power for DCDC DCDC_IN — 3.0 3.3 3.6 —
VDD_HIGH
internal regulator
VDD_HIGH_IN
2
— 3.0 — 3.6 V Must match the range of voltages
that the rechargeable backup
battery supports.
Backup battery
supply range
VDD_SNVS_IN
3
— 2.40 — 3.6 V Can be combined with
VDDHIGH_IN, if the system does
not require keeping real time and
other data on OFF state.
USB supply
voltages
USB_OTG1_VBUS — 4.40 — 5.5 V —
GPIO supplies NVCC_GPIO — 3.0 3.3 3.6 V All digital I/O supplies
(NVCC_xxxx) must be powered
(unless otherwise specified in this
data sheet) under normal
conditions whether the associated
I/O pins are in use or not.
A/D converter VDDA_ADC_3P3 — 3.0 3.3 3.6 V VDDA_ADC_3P3 must be
powered even if the ADC is not
used.
VDDA_ADC_3P3 cannot be
powered when the other SoC
supplies (except VDD_SNVS_IN)
are off.