Datasheet

Electrical characteristics
i.MX 8M Dual / 8M QuadLite / 8M Quad Applications Processors Data Sheet for Industrial Products, Rev. 0, 01/2018
NXP Semiconductors 17
GPIO supply voltages NVCC_JTAG,
NVCC_SD1,
NVCC_SD2,
NVCC_NAND,
NVCC_SAI1,
NVCC_SAI2,
NVCC_SAI3,
NVCC_SAI5,
NVCC_ECSPI,
NVCC_I2C,
NVCC_UART
1.65,
3.0
1.8,
3.3
1.95,
3.6
V—
NVCC_ENET 1.65,
2.25
3.0
1.8,
2.5
3.3
1.95,
2.75
3.6
V—
NVCC_GPIO1 1.65
3.0
1.8,
3.3
1.95,
3.6
V Power for GPIO1_IO00 ~
GPIO1_IO15
NVCC_SNVS 3.0 3.3 3.6 V Power for 3.3 V only
HDMI supply voltage HDMI_AVDDCLK 0.850 0.900 0.990 V 0.9 V supply for HDMI high
speed clock
HDMI_AVDDIO 1.700 1.800 1.900 V 1.8 V supply for HDMI bias
and PLL
HDMI_AVDDCORE 0.850 0.900 0.990 V 0.9 V supply for HDMI analog
MIPI supply voltage MIPI_VDDA 0.81 0.9/1.0 1.1 V Analog core power supply
MIPI_VDDHA 1.62 1.8 1.98 V Analog IO power supply
MIPI_VDD 0.81 0.9/1.0 1.1 V Digital core power supply
MIPI_VDDPLL 0.81 0.9/1.0 1.1 V Analog supply for MIPI PLL
Voltage rails supplied from
1.8 V PHY
PCIE_VPH 1.674
3.069
1.8
3.3
1.98
3.63
V Supplied from PMIC
PCIE_VP, PCIE_VPTX 0.837 0.9 0.99 V Supplied from PMIC
Temperature sensor
accuracy
T
delta
— ±3 — °C Typical accuracy over the
range –40°C to 125°C
Fuse power EFUSE_VQPS 1.71 1.8 1.98 V Power supply for internal use
Junction temperature,
industrial
T
J
-40 — +105
o
C See Ta bl e 2 for complete list of
junction temperature
capabilities.
1
Applying the maximum voltage results in maximum power consumption and heat generation. A voltage set point = (Vmin + the
supply tolerance) is recommended. This result in an optimized power/speed ratio.
Table 7. Operating ranges (continued)
Parameter description Symbol Min Typ Max
1
Unit Comment