Datasheet

SOFTWARE AND TOOLS
Simplify product design with a low-cost, feature-rich
development platform that allows you to work with the majority
of the processor’s primary features and the corresponding
software support. For software, design files, development tools
and additional information, visit www.nxp.com/iMX6tools.
MCIMX6ULL-EVK FEATURES
NXP, the NXP logo, Freescale and the Energy Efficient Solutions logo are trademarks of NXP Semiconductors. All other product
or service names are the property of their respective owners. ARM and Cortex are registered trademarks of ARM Limited (or its
subsidiaries) in the EU and/or elsewhere. All rights reserved. © 2016 NXP B.V.
Document Number:
EVKIMX6ULFS REV 2
www.nxp.com/iMX6ULLEVK and imxcommunity.org
i.MX 6ULL EVK
CPU Board
Processor
NXP i.MX 6ULL 528 MHz ARM
®
Cortex
®
-A7 core,
MCIMX6Y2DVM05AA
Power
management
Discretes
Memory
• 4 GB DDR3L SDRAM, 400 MHz
• 256 MB Quad SPI flash
• MicroSD connector
• Footprint for eMMC
• Footprint for NAND flash
Size 2.66 inch x 1.27 inch (6.76 cm x 4.24 cm), 4-layer board
Base Board
Display board
interface
• LCD expansion port connector
• HDMI connector and footprint for HDMI transmitter
Audio
• Audio codec
• 3.5 mm stereo headphone output with MIC
• Mono-microphone input on board
• Left and right speaker out connectors
Connectivity
• One USB 2.0 Micro-B OTG connector
• One USB 2.0 Standard-A host connector
• Two Ethernet (10/100T) connectors
• Dual CAN connector
• SD/SDIO connector
Camera Parallel camera connector
Sensors
• NXP MAG3110 eCOMPASS
• NXP FXLS8471Q accelerometer
• Footprint for gyroscope
Debug
• 20-pin standard JTAG connector
• UART to Micro USB connector
Expansion port Arduino
®
header
Size 5.12 inch x 4.25 inch (13.0 cm x 10.8 cm), 4-layer board