Datasheet

i.MX 6UltraLite EVK Board Hardware User’s Guide, Rev. 1, 03/2016

Freescale Semiconductor, Inc. 15

Specifications

2.15 ARDUINO expansion port (J1703-J1706)

J1703-J1706 (unpopulated) is defined as the ARDUINO Interface. If the developer wants to use the

processor for ARDUINO development, the following rework should be implemented.

• Populate- R1717-R1732

The pin definitions of ARDUINO interface are shown in following table.

2.16 Camera module connector (J1801)

One parallel CSI (Camera Sensor Interface) (up to 24 bit and up to 133 MHz) is supported by the i.MX

6UltraLite processor. It is designed to support 24-bit RGB888/YUV444, CCIR656, 8-bit YCbCr, YUV or

RGB, and 8-bit/10-bit/26-bit Bayer data input.

The CMOS module is OV5640-MRFL-AB0T, which is based on OmniVision chipset OV5640. The

developer can choose another CMOS module on their project, if the pin map is compatible. The connector

used in i.MX 6UltraLite EVK is FX12B-40P-0.4SV, from HIROSE.

Table 6. ARDUINO pin definitions

J1703 J1706

UART_RX/D0 A0

UART_TX/D1 A1

D2 A2

D3 A3

D4 A4

D5 A5

J1704 J1704

D8 NC

D9 3.3V

D10/SPI_CS RESET

D11/SPI_MOSI 3.3V

D12/SPI_MISO 5V

D13/SPI_CLK GND

GND GND

3.3V 3.3V

D14/I2C_SDA

D15/I2C_SCL