Datasheet

ManualsBrandsNXP ManualsDevelopment Boards & KitsSABRE Board for Smart Devices Based on the i.MX 6SoloX Applications Processors

i.MX Applications Processors

SABRE Board for Smart Devices

Based on the i.MX 6 Series

Overview

The Smart Application Blueprint for Rapid Engineering (SABRE) board for smart devices

was created to simplify product design by offering a feature-rich development platform that

allows developers to work with the majority of the i.MX 6 series processor’s primary features.

It provides a basic product design and serves as an example for how to layout complex,

high-speed interfaces such as DDR. The SABRE board for smart devices includes complete

hardware design files and board support packages (BSP) for Android™, Linux

and MQX™

(for Cortex-M4 on i.MX 6SoloX applications processors).

SABRE boards enable designers to quickly get started with i.MX 6 series processors. The

MCIMX6Q-SDB enables development on i.MX 6Quad and i.MX 6Dual processors, and the

MCIMX6SX-SDB on i.MX 6SoloX processors. There are a number of accessory boards that

work with the SABRE-SDB to provide additional capabilities such as multi-touch display

and Wi-Fi connectivity. Refer to freescale.com/SABRESDB for more information.

SABRE Board for

Smart Devices System

Contents

• i.MX 6Quad or 6SoloX

processor-based system

• Power supply

• Quick start guide

• Bootable SD card

Figure 1: MCIMX6Q-SDB

MCIMX6Q-SDB Features

Processor • Freescale i.MX 6Quad 1 GHz processor based on the ARM

Cortex

-A9 core

Development for • i.MX 6Quad and i.MX 6Dual

Memory/storage

• 1 GB DDR3 SDRAM up to 533 MHz (1066 MTPS) memory

• 8 GB eMMC flash

Display

• 2x LVDS connectors

• HDMI connector

• LCD expansion connector (parallel, 24-bit)

User interface • Power, reset, volume buttons

Power management • Freescale MMPF0100

Audio

• Wolfson audio codec

• Microphone and headphone jacks

Expansion connector

• Camera MIPI CSI port

• I

C, SSI, SPI signals

Connectivity

• Full-size SD/MMC card slots (2x)

• 7-pin SATA data connector

• 10/100/1000 Ethernet port

• 1x USB 2.0 OTG port (micro USB)

Debug

• JTAG connector (20-pin)

• 1x Serial-to-USB connector (for JTAG)

OS support

• Linux

and Android™ (Freescale)

• Others supported via third party (QNX, WindowsCE)

Tools support

• Manufacturing tool (Freescale)

• Processor Expert IOMUX tool (Freescale)

Additional features

• 3-axis Freescale accelerator

• USB plug power supply