Datasheet

LPC84x All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2018. All rights reserved.
Product data sheet Rev. 1.7 — 27 February 2018 93 of 97
NXP Semiconductors
LPC84x
32-bit Arm Cortex-M0+ microcontroller
19. Revision history
Table 37. Revision history
Document ID Release date Data sheet status Change notice Supersedes
LPC84X v.1.7 20180227 Product data sheet - LPC84X v.1.6
Modifications: • Updated Table 17 “Dynamic characteristic: FRO”: Max values: FRO clock frequency;
Condition: 20 C  T
amb
 70 C and FRO clock frequency; Condition: 40 C  T
amb

105 C.
LPC84X v.1.6 20180216 Product data sheet - LPC84X v.1.5
Modifications:
• Updated reflow soldering of the HVQFN48 package to add three figures: Figure 46 “Reflow
soldering of the HVQFN48 package (7x7) 1 of 3”, Figure 47 “Reflow soldering of the HVQFN48
package (7x7) 2 of 3” and Figure 48 “Reflow soldering of the HVQFN48 package (7x7) 3 of 3”.
LPC84X v.1.5 20171214 Product data sheet - LPC84X v.1.4
Modifications:
• Updated Table 25 “Dynamic characteristic: Typical wake-up times from low power modes”.
• Removed remark from Section 8.17 “Capacitive Touch Interface”:
Remark: Evaluation kits and software packages for Capacitive Touch will be available in late
Q3-2017.
LPC84X v.1.4 20171128 Product data sheet - LPC84X v.1.3
Modifications:
• Updated Table 17 “Dynamic characteristic: FRO”. Added conditions20 C  T
amb
 70 C
and 40 C  T
amb
 105 C.
• Updated Figure 8 “LPC84x AHB Memory mapping”.
• Updated table notes: Table 15 “Static characteristics, pin characteristics”.
• Updated Table 14 “Power consumption for individual analog and digital blocks”: FRO Typical
supply current in μA is 89.
LPC84X v.1.3 20170809 Product data sheet - LPC84X v.1.2
Modifications:
• Updated Table 9 “Limiting values”: Added max values for supply and ground pins for LQFP48,
HVQFN48, and HVQFN33 packages.
• Updated Table 1 “Ordering information”: Description of part number LPC844M201JHI48 and
package name, HVQFN48.
LPC84X v.1.2 20170801 Product data sheet - LPC84X v.1.1
Modifications:
• Updated Table 7 “Peripheral configuration in reduced power modes” and Table 8 “Wake-up
sources for reduced power modes”: Cap Touch interrupt can wake up from power down mode.
• Updated Table 2 “Ordering options”. LPC845M301JHI33 does not have Capacitive Touch.
LPC84X v.1.1 20170623 Product data sheet - LPC84X v.1
Modifications:
• Updated Table 27 “12-bit ADC static characteristics”.
• Added a remark to Section 8.17 “Capacitive Touch Interface”: Evaluation kits and software
packages for Capacitive Touch will be available in late Q3-2017.
LPC84X v.1 20170619 Product data sheet - -