Datasheet

NXP Semiconductors
KTPF4210EPEVBUG
KITPF4210EPEVB evaluation board
KTPF4210EPEVBUG All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved.
User guide Rev. 1.0 — 8 February 2018
4 / 18
3.3 System requirements
The kit requires the following to function properly with the software:
• Windows XP or Windows 7 operating system
4 Getting to know the hardware
4.1 Board features
• Input voltage operation range from 3.1 V to 4.5 V
• Output voltage supplies accessible through detachable terminal blocks
– Four to six independent buck converters
– One 5.0 V boost regulator
– Six general purpose LDO regulators
– One DDR memory termination voltage reference
– One VSRTC supply
• Coin cell support for “Try-Before-Buy” (TBB) mode
• On/off push button support
• Hardware configuration flexibility through various jumper headers and resistors
• Integrated USB to I
2
C programming interface for full control/configuration
– Onboard PMIC control through the I
2
C register map
– Fully featured programmer through J36 for external device control/programming
• On board connectors for interfacing with future evaluation/debug tools
• Compact form factor (4 x 4 in
2
)