Datasheet

NXP Semiconductors
UM11193
KITFS85AEEVM evaluation board
UM11193 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 2.1 — 30 January 2019
41 / 52
SPI/I2C:
• Configure the device to work with FIN input
• Select the signal to apply on FOUT pin
• Play with manual frequencies and spread spectrum
8.4.3 Regulators
The regulator has two main areas:
• Low voltage (LV) regulators configuration
• VPRE compensation network calculation
Each regulator can either be enabled or disabled by SPI/I2C. The thermal shutdown
behavior can be configured to either shutdown the regulator, or shutdown the regulator
and transition to deep fail-safe. The write button applies to the entire table. The
VPRE compensation network calculator helps to define the value for VPRE external
compensation network.
Figure 33. Regulators
8.4.4 Measurements
This tab enables two features:
• Read any of the AMUX signals over time
• Display regulator voltage summary