Datasheet

NXP Semiconductors
UM11193
KITFS85AEEVM evaluation board
UM11193 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 2.1 — 30 January 2019
38 / 52
Figure 27. Build a command
The value 0x0800 is sent to the register M_REG_CTRL1 (BUCK2DIS). The user can
then send it to the device by clicking the arrow (see Figure 28).
Figure 28. Send script
Figure 29. Correct format
Figure 30. Wrong format (“//” missing in second line)