Datasheet

NXP Semiconductors
UM11193
KITFS85AEEVM evaluation board
UM11193 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 2.1 — 30 January 2019
36 / 52
Figure 25. Disabling device mode polling
To move from one mode to the other, select the mode with switch mode drop-down
button and click Apply to validate. At this time, the current mode is updated at the
condition that Poll button is enabled.
8.3 Working with the Script editor
The register and OTP emulation can be configured with the script editor. This is
particularly useful to try various OTP configurations in Emulation mode.
Figure 26. Script Editor
The main subareas of this panel are:
• Send and receive command: displays a summary of commands sent and received
from the device
• Command script editor: builds commands to be sent to the device
• Script text editor: sends a sequence of register configurations from a text file or from
command edited directly in this area
• Script results: displays result status of each command sent to the device