Datasheet

NXP Semiconductors
UM11193
KITFS85AEEVM evaluation board
UM11193 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 2.1 — 30 January 2019
34 / 52
Figure 23. Launcher panel - bus selection
When the configuration is selected, click OK.
8.2 Establishing the connection between FlexGUI and the hardware
The board must be connected to the USB before establishing a connection.
• Click Search to detect the COM port of the board.
• Click Start to enable the connection.