Datasheet

NXP Semiconductors
UM11193
KITFS85AEEVM evaluation board
UM11193 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 2.1 — 30 January 2019
14 / 52
4.3.3.2 Output power supply connectors
Table 5. BUCK1/BUCK2 connector (J14)
Schematic label Signal name Description
J14-1 BUCK2 BUCK2 power supply output
J14-2 BUCK1 BUCK1 power supply output
J14-3 GND Ground
Table 6. VBOOST/BUCK3 connector (J16)
Schematic label Signal name Description
J16-1 VBOOST VBOOST output
J16-2 BUCK3 BUCK3 power supply output
J16-3 GND Ground
Table 7. LDO1/LDO2 connector (J2)
Schematic label Signal name Description
J2-1 LDO1 LDO1 power supply output
J2-2 LDO2 LDO2 power supply output
J2-3 GND Ground
Table 8. VPRE connector (J3)
Schematic label Signal name Description
J3-1 VPRE VPRE power supply output
J3-2 GND Ground
4.3.3.3 Debug connector (J29)
Table 9. Debug connector (J29)
Schematic label Signal name Description
J29-1 FOUT Frequency synchronization output
J29-2 FIN Frequency synchronization input
J29-3 PGOOD Power GOOD
J29-4 n.c. not connected
J29-5 INTB Interrupt, active low
J29-6 n.c. not connected
J29-7 RSTB Reset, active low
J29-8 n.c. not connected
J29-9 ERRMON Error monitoring
J29-10 n.c. not connected
J29-11 AMUX Analog multiplexer
J29-12 FS0B_Out Fail-safe, active low
J29-13 VDDIO_EXT VDDIO external reference