Datasheet

NXP Semiconductors
UM11193
KITFS85AEEVM evaluation board
UM11193 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2020. All rights reserved.
User manual Rev. 2.1 — 30 January 2019
10 / 52
1. VBAT Jack connector
2. VBAT three position switch
3. VBAT Phoenix connector
4. LDO1/LDO2 power supplies
5. VPRE power supply
6. BUCK1/BUCK2 power supply
7. USB connector (for FlexGUI control)
8. Debug connectivity
9. Programming
10. Wake1 switch
11. OTP burning voltage switch
12. VBOOST and BUCK3 power supply
13. DEBUG voltage source
14. PGOOD LED enable
15. VDDIO selection
16. SPI / RSTB / FS0B connection to MCU
17. RSTB, INTB and FS0B signals
18. VMONx, VDDI2C selection
Figure 12. Evaluation board featured component locations
Table 2. Evaluation board board component descriptions
Number Description
1 VBAT Jack connector
2 VBAT three position switch
• Left position: board supplied by Jack connector
• Middle position: board not supplied
• Right position: board supplied by Phoenix connector
3 VBAT Phoenix connector
4 LDO1/LDO2 power supply
5 VPRE power supply
6 BUCK1/BUCK2 power supply