Datasheet

JN5169M0x All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2016. All rights reserved.
Product data sheet Rev. 3.0 — 19 September 2016 3 of 27
NXP Semiconductors
JN5169-001-M0x-2
ZigBee 3.0, ZigBee PRO and IEEE802.15.4 modules
 RX current 22.8 mA at maximum input level 10 dBm
 2.0 V/3.6 V operation
2.3 Features: microcontroller
 32-bit RISC CPU; 1 MHz to 32 MHz clock speed
 Variable instruction width for high coding efficiency
 Multi-stage instruction pipeline
 512 kB Flash
 32 kB RAM
 4 kB EEPROM
 Data EEPROM with guaranteed 100 k write operations
 2-wire I
2
C-bus compatible serial interface; can operate as either master or slave
 5  PWM (4 timers, 1 timer/counter)
 2 low-power sleep counters
 2UARTs
 SPI-bus Master and Slave port, 3 selects
 Supply voltage monitor with 8 programmable thresholds
 6-input 10-bit ADC, comparator
 Battery and temperature sensors
 Watchdog and Supply Voltage Monitor (SVM)
 Up to 20 Digital IO (DIO) pins
3. Applications
 Robust and secure low-power wireless applications
 ZigBee Smart Energy networks
 ZigBee Home Automation networks
 Toys and gaming peripherals
 Energy harvesting - for example, self-powered light switch
4. Overview
The JN5169-001-M0x-2 family is a range of ultra-low power, high performance surface
mount modules targeted at IEEE 802.15.4, ZigBee 3.0 and ZigBee Home Automation,
Light Link and Smart Energy networking applications, enabling users to realize products
with minimum time to market and at the lowest cost. They remove the need for expensive
and lengthy development of custom RF board designs and test suites. The modules use
NXP’s JN5169 wireless microcontroller to provide a comprehensive solution with large
memory, high CPU and radio performance and all RF components included. All that is
required to develop and manufacture wireless control or sensing products is to connect a
power supply and peripherals such as switches, actuators and sensors, considerably
simplifying product development.
3 module variants are available: JN5169-001-M00-2 with an integrated printed antenna,
JN5169-001-M03-2 and JN5169-001-M06-2 with a FL antenna connector. The
JN5169-001-M06-2 also has a power amplifier and LNA for extended range.