Datasheet

Quick Start Guide
6
GETTING STARTED
This section describes how to use the MEK and the required accessories to develop
applications using the kit.
1
Unpacking
the Kit
The MEK is shipped with the itemslisted in Table 1. Ensure the itemsare available
in the i.MX 8QuadMax MEK.
ITEM DESCRIPTION
CPU board CPU board with i.MX 8QuadMax application processor, memory and PMIC
Power supply Power supply , 12V DC,11.5A, Lev el VI ,With DIN 4 Pin Output Ty pe
AC Power cord IEC cable assembly with locking sy stem f or IEC C14 inlet, US v ersion,
1.83M
Worldwide Adapter Hardware accessory , universal power adapter
LVDS-to-HDMI Adapter
Card
PWA, IMX-LVDS-HDMI
Mini SAS cable Cable assembly ,IPASS(Mini-SAS), internal cable, 36 CKT 4X W/ Sidebands
JTAG- GEN2 Adapter Card 10-to-20 pin JTAG adapter
10-wire ribbon cable Cable, Ribbon IDC, 1.27MM, 4", 10POS f or JTAG adapter
USB Type-C cable Cable -Assembly , USB 3.0 Ty pe-A Female, USB Ty pe-C Male, Shielded,
200mm
SD Card with BSP image Module, SD Card, 16GB, Class -10
Micro USB Cable USB Cable, USB A Male to Micro B , f or interf ace to debug port
QSG Quick Start Guide
Table 1: Contents of the i.MX 8QuadMax Multisensory Enablement Kit