Datasheet
i.MX 6DualPlus/6QuadPlus Automotive Applications Processors, Rev. 3, 11/2018
4 NXP Semiconductors
Introduction
The two characteristics that identify which data sheet a specific part applies to are the part number series
field and the temperature grade (junction) field:
• The i.MX 6DualPlus/6QuadPlus Automotive Applications Processors data sheet (IMX6DQPAEC)
covers parts listed for the “Plus” series and with “A” indicating automotive temperature.
•The
i.MX 6DualPlus/6QuadPlus
Applications Processors for Consumer Products data sheet
(IMX6DQPCEC) covers parts listed with “D (Commercial temp)” or “E (Extended Commercial
temp)”
• The i.MX 6DualPlus/6QuadPlus Applications Processors for Industrial Products data sheet
(IMX6DQPIEC) covers parts listed with “C (Industrial temp)”
Ensure that you have the right data sheet for your specific part by checking the fields: Part # Series
(DP/QP), temperature grade (junction) (A), and Frequency (8).
Figure 1. Part Number Nomenclature—i.MX 6DualPlus and i.MX 6QuadPlus
1.2 Features
The i.MX 6DualPlus/6QuadPlus processors are based on Arm Cortex-A9 MPCore platform, which has
the following features:
• Arm Cortex-A9 MPCore 4xCPU processor (with TrustZone
®
)
• The core configuration is symmetric, where each core includes:
— 32 KByte L1 Instruction Cache
— 32 KByte L1 Data Cache
Part differentiator @
Industrial with VPU, GPU, no MLB 7
Automotive with VPU, GPU 6
Consumer, with VPU, GPU 5
Automotive with GPU, no VPU 4
Temperature Tj
+
Extended commercial: -20 to + 105
°
CE
Industrial: -40 to +105
°
CC
Automotive: -40 to + 125
°
CA
Frequency $
800 MHz
1
(Industrial grade) 8
852 MHz (Automotive grade) 8
1 GHz
2
1
1.2 GHz 2
Package type
RoHS
FCPBGA 21x21 0.8mm (lidded) VT
FCPBGA 21x21 0.8mm (non lidded) YM
Qualification level MC
Prototype Samples PC
Mass Production MC
Special SC
Part # series XX
i.MX 6QuadPlus QP
i.MX 6DualPlus DP
Silicon revision A
Rev 1.0 A
Rev 1.1 B
Fusing %
Real Codec off and no HDCP or DTCP
A
MC IMX6 XX @ + VV $ % A
1. If a 24 MHz input clock is used (required for USB), the maximum SoC speed is limited to 792 MHz.
2. If a 24 MHz input clock is used (required for USB), the maximum SoC speed is limited to 996 MHz.