Datasheet

Electrical Characteristics
i.MX 6DualPlus/6QuadPlus Automotive Applications Processors, Rev. 3, 11/2018
NXP Semiconductors 31
4.1.9 PCIe 2.0 Maximum Power Consumption
Table 12 provides PCIe PHY currents for certain operating modes.
P1: Transmitter idle, Rx powered
down, LOS disabled
Single Transceiver SATA_VP 0.67 mA
SATA_VPH 0.23
Clock Module SATA_VP 6.9
SATA_VPH 6.2
P2: Powered-down state, only
LOS and POR enabled
Single Transceiver SATA_VP 0.53 mA
SATA_VPH 0.11
Clock Module SATA_VP 0.036
SATA_VPH 0.12
PDDQ mode
3
Single Transceiver SATA_VP 0.13 mA
SATA_VPH 0.012
Clock Module SATA_VP 0.008
SATA_VPH 0.004
1
Programmed for 1.0 V peak-to-peak Tx level.
2
Programmed for 0.9 V peak-to-peak Tx level with no boost or attenuation.
3
LOW power non-functional.
Table 12. PCIe PHY Current Drain
Mode Test Conditions Supply Max Current Unit
P0: Normal Operation 5G Operations PCIE_VP (1.1 V) 40 mA
PCIE_VPTX (1.1 V) 20
PCIE_VPH (2.5 V) 21
2.5G Operations PCIE_VP (1.1 V) 27
PCIE_VPTX (1.1 V) 20
PCIE_VPH (2.5 V) 20
P0s: Low Recovery Time
Latency, Power Saving State
5G Operations PCIE_VP (1.1 V) 30 mA
PCIE_VPTX (1.1 V) 2.4
PCIE_VPH (2.5 V) 18
2.5G Operations PCIE_VP (1.1 V) 20
PCIE_VPTX (1.1 V) 2.4
PCIE_VPH (2.5 V) 18
Table 11. SATA PHY Current Drain (continued)
Mode Test Conditions Supply Typical Current Unit