Datasheet

i.MX 6DualPlus/6QuadPlus Automotive Applications Processors, Rev. 3, 11/2018
140 NXP Semiconductors
Boot Mode Configuration
NAND Flash GPMI NANDF_CLE, NANDF_ALE, NANDF_WP_B,
SD4_CMD, SD4_CLK, NANDF_RB0, SD4_DAT0,
NANDF_CS0, NANDF_CS1, NANDF_CS2,
NANDF_CS3, NANDF_D[7:0]
8 bit
Only CS0 is supported
SD/MMC USDHC-1 SD1_CLK, SD1_CMD,SD1_DAT0, SD1_DAT1,
SD1_DAT2, SD1_DAT3, NANDF_D0, NANDF_D1,
NANDF_D2, NANDF_D3, KEY_COL1
1, 4, or 8 bit
SD/MMC USDHC-2 SD2_CLK, SD2_CMD, SD2_DAT0, SD2_DAT1,
SD2_DAT2, SD2_DAT3, NANDF_D4, NANDF_D5,
NANDF_D6, NANDF_D7, KEY_ROW1
1, 4, or 8 bit
SD/MMC USDHC-3 SD3_CLK, SD3_CMD, SD3_DAT0, SD3_DAT1,
SD3_DAT2, SD3_DAT3, SD3_DAT4, SD3_DAT5,
SD3_DAT6, SD3_DAT7, GPIO_18
1, 4, or 8 bit
SD/MMC USDHC-4 SD4_CLK, SD4_CMD, SD4_DAT0, SD4_DAT1,
SD4_DAT2, SD4_DAT3, SD4_DAT4, SD4_DAT5,
SD4_DAT6, SD4_DAT7, NANDF_CS1
1, 4, or 8 bit
I2C I2C-1 EIM_D28, EIM_D21 —
I2C I2C-2 EIM_D16, EIM_EB2 —
I2C I2C-3 EIM_D18, EIM_D17 —
SATA SATA_PHY SATA_TXM, SATA_TXP, SATA_RXP, SATA_RXM,
SATA_REXT
—
USB USB-OTG
PHY
USB_OTG_DP
USB_OTG_DN
USB_OTG_VBUS
—
Table 94. Interfaces Allocation During Boot (continued)
Interface IP Instance Allocated Pads During Boot Comment