Datasheet

i.MX 6DualPlus/6QuadPlus Automotive Applications Processors, Rev. 3, 11/2018
108 NXP Semiconductors
Electrical Characteristics
HS Line Drivers DC Specifications
|V
OD
| HS Transmit Differential
output voltage magnitude
80 Ω<= RL< = 125 Ω 140 200 270 mV
Δ|V
OD
| Change in Differential output
voltage magnitude between
logic states
80 Ω<= RL< = 125 Ω —— 10mV
V
CMTX
Steady-state common-mode
output voltage.
80 Ω<= RL< = 125 Ω 150 200 250 mV
ΔV
CMTX
(1,0) Changes in steady-state
common-mode output voltage
between logic states
80 Ω<= RL< = 125 Ω —— 5 mV
V
OHHS
HS output high voltage 80 Ω<= RL< = 125 Ω ——360mV
Z
OS
Single-ended output
impedance.
— 40 50 62.5 Ω
ΔZ
OS
Single-ended output
impedance mismatch.
———10%
LP Line Drivers DC Specifications
V
OL
Output low-level SE voltage — -50 50 mV
V
OH
Output high-level SE voltage — 1.1 1.2 1.3 V
Z
OLP
Single-ended output
impedance.
— 110 — — Ω
ΔZ
OLP(01-10)
Single-ended output
impedance mismatch driving
opposite level
———20%
ΔZ
OLP(0-11)
Single-ended output
impedance mismatch driving
same level
———5%
HS Line Receiver DC Specifications
V
IDTH
Differential input high voltage
threshold
———70mV
V
IDTL
Differential input low voltage
threshold
—-70——mV
V
IHHS
Single ended input high
voltage
———460mV
V
ILHS
Single ended input low
voltage
—-40——mV
V
CMRXDC
Input common mode voltage — 70 — 330 mV
Z
ID
Differential input impedance — 80 — 125 Ω
Table 68. Electrical and Timing Information (continued)
Symbol Parameters Test Conditions Min Typ Max Unit