Datasheet
Electrical Characteristics
i.MX 6Dual/6Quad Automotive and Infotainment Applications Processors, Rev. 6, 11/2018
NXP Semiconductors 23
4.1.3 Operating Ranges
Table 6 provides the operating ranges of the i.MX 6Dual/6Quad processors.
Table 6. Operating Ranges
Parameter
Description
Symbol Min Typ Max
1
Unit Comment
2
Run mode:
LDO enabled
VDD_ARM_IN
VDD_ARM23_IN
3
1.35
4
— 1.5 V LDO Output Set Point (VDD_ARM_CAP
5
) of
1.225 V minimum for operation up to 852 MHz
or 996 MHz (depending on the device speed
grade).
1.275
4
— 1.5 V LDO Output Set Point (VDD_ARM_CAP
5
) of
1.150 V minimum for operation up to 792 MHz.
1.05
4
— 1.5 V LDO Output Set Point (VDD_ARM_CAP
5
) of
0.925 V minimum for operation up to 396 MHz.
VDD_SOC_IN
6
1.350
4
— 1.5 V 264 MHz < VPU ≤ 352 MHz; VDDSOC and
VDDPU LDO outputs (VDD_SOC_CAP and
VDD_PU_CAP) require 1.225 V minimum.
1.275
4,7
— 1.5 V VPU ≤ 264 MHz; VDDSOC and VDDPU LDO
outputs (VDD_SOC_CAP and VDD_PU_CAP)
require 1.15 V minimum.
Run mode:
LDO bypassed
8
VDD_ARM_IN
VDD_ARM23_IN
3
1.225 — 1.3 V LDO bypassed for operation up to 852 MHz or
996 MHz (depending on the device speed
grade).
1.150 — 1.3 V LDO bypassed for operation up to 792 MHz.
0.925 — 1.3 V LDO bypassed for operation up to 396 MHz.
VDD_SOC_IN
6
1.225 — 1.3 V 264 MHz < VPU ≤ 352 MHz
1.15 — 1.3 V VPU ≤ 264 MHz
Standby/DSM mode VDD_ARM_IN
VDD_ARM23_IN
3
0.9 — 1.3 V See Table 9, “Stop Mode Current and Power
Consumption,” on page 28.
VDD_SOC_IN 0.9 — 1.3 V
VDD_HIGH internal
regulator
VDD_HIGH_IN
9
2.7 — 3.3 V Must match the range of voltages that the
rechargeable backup battery supports.
Backup battery supply
range
VDD_SNVS_IN
9
2.8 — 3.3 V Should be supplied from the same supply as
VDD_HIGH_IN, if the system does not require
keeping real time and other data on OFF state.
USB supply voltages USB_OTG_VBUS 4.4 — 5.25 V —
USB_H1_VBUS 4.4 — 5.25 V —
DDR I/O supply NVCC_DRAM 1.14 1.2 1.3 V LPDDR2
1.425 1.5 1.575 V DDR3
1.283 1.35 1.45 V DDR3L
Supply for RGMII I/O
power group
10
NVCC_RGMII 1.15 — 2.625 V • 1.15 V – 1.30 V in HSIC 1.2 V mode
• 1.43 V – 1.58 V in RGMII 1.5 V mode
• 1.70 V – 1.90 V in RGMII 1.8 V mode
• 2.25 V – 2.625 V in RGMII 2.5 V mode