Datasheet

i.MX 6Dual/6Quad Automotive and Infotainment Applications Processors, Rev. 6, 11/2018
106 NXP Semiconductors
Electrical Characteristics
Figure 65 depicts the synchronous display interface timing for access level. The DISP_CLK_DOWN and
DISP_CLK_UP parameters are register-controlled. Table 66 lists the synchronous display interface timing
characteristics.
Figure 65. Synchronous Display Interface Timing Diagram—Access Level
Table 66. Synchronous Display Interface Timing Characteristics (Access Level)
ID Parameter Symbol Min Typ
1
1
The exact conditions have not been finalized, but will likely match the current customer requirement for their specific display.
These conditions may be chip specific.
Max Unit
IP16 Display interface clock low
time
Tckl Tdicd-Tdicu-1.24 Tdicd
2
-Tdicu
3
2
Display interface clock down time
3
Display interface clock up time where CEIL(X) rounds the elements of X to the nearest integers towards infinity.
Tdicd-Tdicu+1.24 ns
IP17 Display interface clock
high time
Tckh Tdicp-Tdicd+Tdicu-1.24 Tdicp-Tdicd+Tdicu Tdicp-Tdicd+Tdicu+1.2 ns
IP18 Data setup time Tdsu Tdicd-1.24 Tdicu — ns
IP19 Data holdup time Tdhd Tdicp-Tdicd-1.24 Tdicp-Tdicu — ns
IP20o Control signals offset
times (defined for each
pin)
Tocsu Tocsu-1.24 Tocsu Tocsu+1.24 ns
IP20 Control signals setup time
to display interface clock
(defined for each pin)
Tcsu Tdicd-1.24-Tocsu%Tdicp Tdicu — ns
IP19 IP18
IP20
VSYNC
IP17IP16
DRDY
HSYNC
other controls
IP20o
local start point
Tdicd
Tdicu
IPP_DISP_CLK
IPP_DATA
Tdicd
1
2
---T
diclk
ceil×
2 DISP_CLK_DOWN×
DI_CLK_PERIOD
-----------------------------------------------------------


=
Tdicu
1
2
---T
diclk
ceil×
2 DISP_CLK_UP×
DI_CLK_PERIOD
------------------------------------------------


=