Datasheet

NXP Semiconductors

FRDM33772BSPIEVB

Featuring the MC33772B battery cell controller IC

User guide Rev. 1.0 — 22 June 2018

10 / 20

5. Master/slave field (1 bit)

6. Memory data field (16 bits)

Messages having less or more than 40 bits or incorrect CRC are disregarded.

Communication faults set the COM_ERR_FLT fault bit in the FAULT1_STATUS register

and increments the COM_STATUS[COM_ERR_COUNT] register.

Detailed schematic, component selection, and layout recommendations can be obtained

from the NXP DocStore (NDA required) [6].

5 Configuring the hardware

The FRDM33772BSPIEVB can be configured as a shield board connected to selected

Freedom boards.

5.1 Compatible NXP MCU development platforms

FRDM33772BSPIEVB is compatible with multiple NXP MCU development platforms:

• FRDM-KL25Z (default)

• FRDM-KE06Z

• FRDM-KL43Z

• FRDM-KV31F

• FRDM-KW40Z

• FRDM-KEAZ128

• S32K144EVB

• Arduino R3

MCU development platform ordering, instruction, and other information is on nxp.com.

Table 5. Jumper setting to work with FRDM-KL25Z (default)

Jumper Setting Description

J22 1-2 RESET

J26 1-2 CSB

J27 open —

J28 open —

J29 1-2 MOSI

J30 open —

J31 open —

J32 1-2 MISO

J33 open —

J34 open —

J36 1-2 SLCK

J37 open —

J38 open —

J41 1-2 GND