Datasheet

FRDM-KV11Z Hardware Description
FRDM-KV11Z Evaluation Board Users Guide
NXP Semiconductors 7
header will insure signal integrity. The pinout and KV11 pin connections to the debug connector (J13)
are shown figure below. The signal RST_TGTMCU_B is tied to the KV11 RESET_b pin.
Figure 5. Cortex debug connector
Virtual mass storage device programming
A mass storage device is enumerated in a Windows base machine when you attach the FRDM-KV11
with a USB cable to the Windows computer USB connector.
Figure 6. Flash programming MSD and SDA_INFO
To program the KV11 MCU flash drag and drop a binary or SRECORD file compiled for the Kinetis
KV11 MCU on to the FRDM-KV11Z virtual MSD device. If you open the SDA_INFO file on the
FRDM-KV11 MSD you will be able to determine the versions of the firmware on your OpenSDA
debugger.