Datasheet

Clock source
FRDM-KV11Z Evaluation Board Users Guide
10 NXP Semiconductors
Memories
• 128 KB flash memory (KMS indicated by P suffix uses top 8
KB of flash).
• 16 KB SRAM embedded memory.
System Peripherals
• Flexible low-power modes, multiple wake-up sources.
• 4-channel DMA controller.
• Independent external and software watchdog monitor.
Clocks
• 32 to 40 kHz or 3-32 MHz crystal oscillator
• Multipurpose clock generator with FLL (MCG)
Security and integrity modules
• Hardware CRC module.
• 80-bit unique identification (ID) number per chip.
• Flash access control to protect proprietary software (used by
KMS protecting the top 8 Kbytes of Flash).
Analog Modules
• Two 16-bit SAR ADCs (1.2 MS/s in 12-bit mode)
• One 12 bit DAC.
• Two analog comparators (CPM) with 6-bit DAC
Timers
• One 8-ch motor-control/general purpose/PWM timers
• Two 2-ch motor-control/general purposed timers with
quadrature decoder functionality.
• Periodic interrupt timers.
• 16-bit low-power timer
• Two Programmable delay blocks (one PDB per ADC)
Communication interfaces
• One SPI module.
• Two UART modules.
• One I2C: support for up to 1Mbit/s operation.
• One CAN module.
5. Clock source
A 10 MHz external crystal is used for the external clock source of the KV10Z MCU.