Datasheet

Table 47. Power consumption operating behaviors (continued)
Symbol Description Typ. Max. Unit Notes
I
DD_VLPW
Very Low Power Run Wait current,
core disabled, system at 2 MHz, bus
and flash at 0.5 MHz, all peripheral
clocks disabled, VDD = 3 V
25 °C 225 277.03 μA 6
I
DD_VLPW
Very Low Power Run Wait current,
core disabled, system at 125 kHz,
bus and flash at 31.25 kHz, all
peripheral clocks disabled, VDD = 3
V
25 °C 31 61.00 μA 6
I
IDD_PSTOP2
Partial stop 2, core and system clock
disabled, bus and flash at 12 MHz,
VDD = 3 V
25 °C 2.9 4.26 mA 7
I
DD_STOP
Stop mode current at 3.0 V 25 °C and
below
273 304.31 μA
50°C 306 384.47
85 °C 440 589.29
105 °C 625 925.33
I
DD_VLPS
VLPS current, VDD= 3 V 25 °C and
below
5.82 15.42 μA
50 °C 14.41 29.41
85 °C 56.47 99.67
105°C 121.54 223.54
I
DD_VLPS
VLPS current, VDD= 1.8 V 25 °C and
below
5.61 15.21 μA
50 °C 14.01 29.01
85 °C 55.8 99.00
105 °C 120.14 222.14
I
DD_LLS3
LLS3 current, all peripheral disabled,
VDD = 3 V
25 °C and
below
3.68 7.88 μA
50 °C 8.28 15.48
70 °C 13.52 22.52
85 °C 20.91 39.55
105 °C 40.27 67.79
I
DD_LLS3
LLS3 with RTC current, VDD = 3 V 25 °C and
below
5.08 9.28 μA
50 °C 10.31 17.51
70 °C 15.76 24.76
85 °C 22.8 41.44
105 °C 43.5 71.02
I
DD_LLS3
LLS3 with RTC current, VDD = 1.8 V 25 °C and
below
5.02 9.22 μA
50 °C 10.06 17.26
Table continues on the next page...
Electrical characteristics
Kinetis KL82 Microcontroller, Rev. 3, 08/2016
77
NXP Semiconductors