Datasheet

Table 34. LPUART1 signal descriptions (continued)
Chip signal name Module signal
name
Description I/O
LPUART1_TX LPUART_TX Transmit data. This pin is normally an output, but is an input
(tristated) in single wire mode whenever the transmitter is
disabled or transmit direction is configured for receive data.
I/O
LPUART1_RX LPUART_RX Receive Data I
Table 35. LPUART2 signal descriptions
Chip signal name Module signal
name
Description I/O
LPUART2_CTS_b LPUART_CTS Clear to Send I
LPUART2_RTS_b LPUART_RTS Request to send O
LPUART2_TX LPUART_TX Transmit data. This pin is normally an output, but is an input
(tristated) in single wire mode whenever the transmitter is disabled
or transmit direction is configured for receive data.
I/O
LPUART2_RX LPUART_RX Receive Data I
Table 36. FlexIO signal descriptions
Chip signal name Module signal
name
Description I/O
FXIO0_Dn(n=0-31) FXIO_Dn (n=0...31) Bidirectional FlexIO Shifter and Timer pin inputs/outputs I/O
Table 37. EMVSIM0 signal descriptions
Chip signal name Module signal
name
Description I/O
EMVSIM0_ CLK EMVSIM_SCLK Card Clock. Clock to Smart Card. O
EMVSIM0_ IO EMVSIM_IO Card Data Line. Bi-directional data line. I/O
EMVSIM0_ PD EMVSIM_PD Card Presence Detect. Signal indicating presence or removal of
card
I
EMVSIM0_ RST EMVSIM_SRST Card Reset. Reset signal to Smart Card O
EMVSIM0_ VCCEN EMVSIM_VCC_EN Card Power Enable. This signal controls the power to Smart Card O
Table 38. EMVSIM1 signal descriptions
Chip signal name Module signal
name
Description I/O
EMVSIM1_ CLK EMVSIM_SCLK Card Clock. Clock to Smart Card. O
EMVSIM1_ IO EMVSIM_IO Card Data Line. Bi-directional data line. I/O
Table continues on the next page...
Pinouts
50
Kinetis KL82 Microcontroller, Rev. 3, 08/2016
NXP Semiconductors