Datasheet

EMVSIMn_PD
EMVSIMn_RST
EMVSIMn_CLK
EMVSIMn_IO
EMVSIMn_VCCEN
SI7
SI8
SI9
SI10
Figure 39. Smart Card Interface Power Down AC Timing
Table 83. Timing Requirements for Power-down Sequence
Ref No Parameter Symbol Min Max Units
SI7 EMVSIM reset to SIM clock stop S
rst2clk
0.9 × 1/
Frtcclk
1.1 × 1/Frtcclk ns
SI8 EMVSIM reset to SIM Tx data
low
S
rst2dat
1.8 × 1/
Frtcclk
2.2 × 1/Frtcclk ns
SI9 EMVSIM reset to SIM voltage
enable low
S
rst2ven
2.7 × 1/
Frtcclk
3.3 × 1/Frtcclk ns
SI10 EMVSIM presence detect to
SIM reset low
S
pd2rst
0.9 × 1/
Frtcclk
1.1 × 1/Frtcclk ns
NOTE
Same timing is also followed when auto power down is
initiated. See Reference Manual for reference.
5.4.7.2
USB electrical specifications
The USB electricals for the USB On-the-Go module conform to the standards
documented by the Universal Serial Bus Implementers Forum. For the most up-to-
date standards, visit usb.org.
Electrical characteristics
Kinetis KL82 Microcontroller, Rev. 3, 08/2016
117
NXP Semiconductors