Datasheet
FRDMKL02ZUM FRDM-KL02Z User Manual Page 3 of 11
1. Slide Down to Unlock.
Sliding your finger down along the TSS Pad E1 (from “2” to “1”) will unlock the tilt functionality of
the demo.
2. Tilt to adjust the LED.
With the demo “Unlocked”, tilting the board will change the RGB values displayed on the LED
3. Slide Up to Lock.
Sliding your finger up along the TSS Pad E1 (from “1” to “2”) will unlock the tilt functionality of the
demo, and the LED will only display the default color.
This example demo can be restored using the OpenSDA MSD application documented later in this User
Manual.
4. FRDM-KL02Z Hardware Overview
The FRDM-KL02Z is a microcontroller development board based on the Freescale Freedom platform
featuring the following:
• Kinetis L Series KL02 family MCU in an 32QFN package
• I/O headers for easy access to MCU I/O pins
• Freescale 3-axis accelerometer sensor, MMA8451Q
• Capacitive touch slider using GPIO method based on TSS lib
• Reset pushbutton
• RGB LED
• On-board serial and debug adapter (OpenSDA)
Figure 1 shows a block diagram of the FRDM-KL02Z design.
Figure 1. FRDM-KL02Z Block Diagram
Touch Pad - Slider