Datasheet

For more information, visit
freescale.com/FRDM-KEA
Freescale and the Freescale logo are trademarks of FreescaleSemiconductor,Inc., Reg. U.S.
Pat. & Tm. Off. All other product or service names are the property of their respective owners.
©2015FreescaleSemiconductor,Inc.
Document Number: FRDMKEADEVPLTFS REV 0
Product One-Sheet
Freescale Freedom
FRDM-KEA
Development Platform
Rapidly develop & prototype your
Ultra-Reliable applications
Overview
The Freescale Freedom development platform is a small, cost
effective evaluation and development system for quick application
prototyping and demonstration of Ultra-Reliable Industrial and
Automotive Microcontroller (MCU) families.
Each platform offers an easy-to-use mass-storage device mode
flash programmer, virtual serial port and classic programming
and run-control capabilities.
FRDM-KEA Features
• Kinetis EA microcontroller based on ARM
®
Cortex
®
-M0+,
up to 48 MHz
• Cost-effective—starting at $29.00 resale
• Small form factor size
• Arduino™ UNO footprint-compatible with expansion “shield”
support
• Easy access to the MCU I/O pins
• Integrated open-standard serial and debug adapter (OpenSDA)
with support for several industry-standard debug interfaces.
• On-chip connectivity for CAN, LIN and Ethernet
• Potentiometer for voltage and analog measurement
• Tri-color RGB LED
• Flexible power supply options—microUSB or external 12V
power supply
• Similar hardware platform across Kinetis, S12 and Power
Architecture MCU products
Software Enablement
and Support
• Full featured,complimentary IDE
S32 Design Studio
• Support in Kinetis Design Studio,
CodeWarrior, ARM Keil
®
tool and IAR
• Freescale Software Development Kit (SDK)
incl. bare metal drivers for CAN, LIN, Flash,
PWM and peripherals
• P&E Multilink enabled through the
built-in USB flash programming interface
(OpenSDA).
• Simply plug it in, drop on a binary program
and it’s up and running
• Step-by-step guide with many
demo code examples
OpenSDA: Open-Standard
Serial And Debug Adapter
• Bridges serial and debug communications
between a USB host and an embedded
target processor
• Features a mass storage device bootloader
that provides a quick and
easy mechanism for loading OpenSDA
enabled applications:
Flash programmers
Run-control debug interfaces
Serial-to-USB converters
SEGGER OpenSDA firmware (makes
OpenSDA compatible to J-Link Lite)
Example Freescale Freedom Platform:
FRDM-KEAZ128
Features
Supports KEA MCUs
Potentiometer
and RBG LED
Ultra-Reliable MCUs
CAN/LIN/Ethernet
Connectivity
Get Started
KEA
Part Number Flash ARM Core Communication Package
FRDM-KEAZ128Q80 128 KB Cortex M0+ CAN and LIN/UART 80 LQFP
FRDM-KEAZ64Q64 64 KB Cortex M0+ CAN and LIN/UART 64 LQFP
FRDM-KEAZN32Q64 32 KB Cortex M0+ LIN/UART 64 LQFP