Datasheet

FRDM-KE02Z40M User’s Guide, Rev. 0, 03/2014
Freescale Semiconductor, Inc. 9
However, a 2x5-pin (0.05”) Cortex Debug connector, J7, provides access to the SWD signals for the
KE02Z MCU. The following table shows SWD connector signals description for KE02Z:
Table 3. ARM JTAG/SWD mini connector description
Pin Function Connection to KE02Z
1 VTref 3.3V system power supply
(V_BRD)
2 SWDIO/TMS PTA4/SWD_DIO
3 GND GND
4 SWDCLK/TC
K
PTC4/SWD_CLK
5 GND GND
6 SWO/TDO NC
7 NC NC
8 TDI NC
9 NC NC
10 RESET PTA5/RESET
4.5 Thermistor
One thermistor (RT1) is connected to two ADC inputs (PTF4/ADP12, PTF5/ADP13) of KE02Z for
evaluating the ADC module. See the following figure.