Datasheet

RGB LED
FRDM-K64F Freedom Module User’s Guide, User's Guide, Rev. 1, 08/2016
NXP Semiconductors 13
9. Accelerometer and Magnetometer
An NXP FXOS8700CQ low-power, six-axis Xtrinsic sensor is interfaced through an I
2
C bus and two
GPIO signals, as shown in Table 5. By default, the I
2
C address is 0x1D (SA0 pullup and SA1 pulldown).
Table 5. Accelerometer and magnetometer signals connection
FXOS8700CQ
K64
SCL
PTE24/UART4_TX/I2C0_SCL/EWM_OUT_b
SDA
PTE25/UART4_RX/I2C0_SDA/EWM_IN
INT1
PTC6/SPI0_SOUT/PDB0_EXTRG/I2S0_RX_BCLK/FB_AD9/I2S0_MCLK/LLWU_P10
INT2
PTC13/UART4_CTS_b/FB_AD26
Figure 13. Accelerometer and magnetometer
10. RGB LED
RGB LED is connected through GPIO, signal connections are shown in Table 6.