Datasheet

www.nxp.com/DEVKIT
NXP, the NXP logo and CodeWarrior are trademarks of NXP B.V. All other product or service names are the property of their respective
owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service
marks licensed by Power.org. © 2016 NXP B.V.
Document Number: AUTOMCUDEVKITFS REV 0
Product One-Sheet
Overview
The development kit is a small, cost effective evaluation
and development system for quick application prototyping
and demonstration with Automotive Microcontroller and
Processor products.
Each platform offers an easy-to-use mass-storage device
mode flash programmer, virtual serial port and classic
programming and run-control capabilities.
It’s easy, so get started today.
Features
Cost Effective and Easy to Use
 Development kits starting at $29.00 suggested resale
 Full support within S32 Design Studio (for ARM
®
or PPC
based MCUs) and CodeWarrior IDE’s (S12/S12Z)
 All kits come with Quick Start Guide and demo code examples
Small Form Factor
 PCB sizes less than 150mm x 100mm
Compatibility
 Arduino™ pin-compatibility
 Expand CAN and LIN/SCI ports by adding DEVKIT-COMM
communication shield adapter
 Add BLDC and PMSM motor control using DEVKIT-MOTORGD
shield adapter
Debug Simplicity
 Integrated USB based open-standard serial and debug
adapter (OpenSDA)
 Integrated USB based serial background debug mode
(OpenBDM) on all S12 and S12Z based products
Capability
 Easy access to the MCU GPIO pins using available headers
 Communication support for CAN, LIN, Flexray, USB and Ethernet
 Potentiometer for precise voltage and analog measurement
 Flexible power supply options—microUSB or external
12V power supply
Software Enablement
and Support
 Full featured S32 Design Studio IDE
(S32DS)
 Support for Keil
®
, IAR, SEGGER,
CodeWarrior IDE, ARM mbed™ platform
and more
 Integrated Software Development Kit
S32 SDK (SDK)
 These are mbed and P&E Multilink enabled
through the built-in USB flash programming
interface (OpenSDA and OpenBDM)
 Look for one of the many lab code
examples integrated into S32DS IDE and
available on tool webpages
Portfolio
MCU
 DEVKIT-
MPC5748G
 DEVKIT-
MPC5744P
 DEVKIT-S12ZVL
 DEVKIT-ZVL128
 DEVKIT-S12VR64
 DEVKIT-S12ZVC
 DEVKIT-S12XE
 DEVKIT-S12G128
Expansion Boards
 DEVKIT-COMM (CAN/LIN communication)
 DEVKIT-MOTORGD (motor control)
 DEVKIT-TRANSLATE (translate
FRDM pinout)
Shield Adapter Example: DEVKIT-COMM
Expansion Board
Example: DEVKIT-MPC5748G
Development Kit
NXP Development Kits for Ultra-Reliable MCUs
For rapid prototyping and development of Automotive and
Industrial Applications
Features
Supports multiple architectures
Motor Control
expansion
CAN/ LIN/ Ethernet/ FlexRay™
Communication options
Ease-Of-Use